To remove an Emtek door knob, unscrew the two screws on the plate beneath the handle and gently pull the knob off. Emtek door knobs are a popular choice for many homeowners due to their stylish designs and durability.
However, over time, you may need to remove the door knob for various reasons, such as to repair or replace it. Removing an Emtek door knob is not a difficult task and can be done in just a few simple steps.
In this article, we’ll guide you through the process of removing your Emtek door knob without damaging the door or the hardware.
So, let’s get started and learn how to remove the Emtek door knob.
Credit: hardwarehut.com
Understanding Emtek Door Knobs
First things first, let’s talk about what exactly an Emtek door knob is. Imagine a door knob as a magical key that unlocks the door to your favorite room. Emtek door knobs are just like that, but they come in all sorts of cool designs and colors!
Tools You’ll Need
Before we get started, we need to gather some tools. Here’s what you’ll need:
- Phillips head screwdriver: A Phillips head screwdriver is used to remove the two screws that hold the knob in place on the door.
- Slot head screwdriver: A slot head screwdriver is used to detach the latch plate from the door jamb.
- Allen wrench: An allen wrench is used to loosen the set screw located on the collar of the knob by inserting it into the small hole on the collar.
- Hammer: A hammer can be used to tap the slot-head screwdriver if it’s difficult to remove the latch plate or to tap the collar if it’s stuck.
- Pliers (just in case)
- Maybe a flashlight if it’s dark in there!
Step-by-Step Guide:
If you are looking to remove an Emtek door knob but don’t know where to begin, this step-by-step guide is for you. By following these instructions, you’ll be able to remove Emtek door knobs with ease.
Let’s start with the preparation of the workspace and gather the right tools.
Preparing The Workspace Before Beginning The Process
It’s crucial to prepare your workspace carefully before any attempts to remove an Emtek door knob. Here are some key points to keep in mind:
- Inadequate preparation can lead to damage to your door and door handle.
- Removing the Emtek door knob may require extensive effort and time, and it is essential to have all the necessary tools close at hand.
- Removing a door knob can expose sharp edges and other potential hazards that can lead to accidental injury if not handled carefully.
To avoid these issues, take the time to clear your workspace and gather essential tools such as a screwdriver, pliers, and safety gloves.
Also, ensure that the area around the door is free of any obstructions, such as artwork, furniture, and other items, that could hinder the removal process.
Steps: How to Remove Emtek Door Knob
Step 1: Locate the slot
Now comes the fun part! Look for a small slot on the side of the doorknob shank (the metal rod that goes through the door). This slot should be near the base of the knob, where it meets the interior trim plate.
Step 2: Depress the button
Inside the slot, you should see a small button. Use the flat-head screwdriver to carefully press down on this button. This releases the mechanism holding the knob in place.
Step 3: Remove the knob
Once the button is depressed, the doorknob should come loose. You might need to wiggle it slightly to remove it completely.
Step 4: Remove the interior trim plate
With the knob removed, you should see the interior trim plate. This plate is usually held on by screws or a spring clip. You can remove it by unscrewing the screws or carefully prying off the clip.
Step 5: Remove the latch assembly
Once the trim plate is removed, you’ll see the latch assembly attached to the door. You can remove this by hand by sliding it out from the opposite side of the door.
Safety Tips
Safety first, kiddo! Make sure to be gentle with the door and watch out for any sharp edges. If you need help, don’t be afraid to ask an adult.
Common Mistakes to Avoid
Oh no, watch out for these common mistakes! Don’t force anything too hard, and make sure to keep track of all the screws so you don’t lose them.
People commonly make the following mistakes:
- Not having the right tools: Make sure to have a screwdriver and a small pin or paperclip before you start.
- Applying too much force: Use a gentle touch when pressing the pin and pulling the knob.
- Removing the wrong screws: Identify the screws that hold the latch plate, backplate, and strike plate, and make sure to remove them in the correct order.
- Not paying attention to the orientation: Take note of how the door knob is oriented, so you can reinstall it correctly.
By avoiding these mistakes, you can ensure that the process of removing your Emtek door knob will be hassle-free.
Putting It All Back Together
Once you’ve fixed whatever needs fixing, it’s time to put everything back together. Just follow the steps in reverse, and you’ll be good to go!
When to Seek Help
If you’re ever unsure about anything or if something just doesn’t seem right, it’s always a good idea to ask for help from someone who knows what they’re doing.
Troubleshooting
Despite using the right tools, you may face some problems. But don’t worry; here, we’ll discuss the possible concerns you may encounter while removing Emtek door knobs and provide tips, hacks, and workarounds on how to solve these issues.
1. The Doorknob Is Stubborn And Won’t Come Off Easily
- Apply lubricant: Apply lubricant to the screws and allow them to sit for 10-15 minutes before attempting to remove them.
- Use pliers: Use pliers to grip the screws and turn them counterclockwise to remove them.
- Tap lightly: Lightly tap the doorknob with a hammer to loosen it if it is stuck.
2. There Are Stripped Screws And You Can’t Remove Them
- Use a screw extractor: Use a screw extractor to remove the stripped screws. Place the extractor in the screw and turn it counterclockwise to remove the screw.
- Use pliers: Use pliers to grip the screw and turn it counterclockwise to remove it.
- Drill it out: Drill out the screw using a drill bit that is slightly smaller than the screw. Be careful not to drill too deep and damage the door.
3. The Latch Is Still In The Door After Removing The Doorknob
- Use a screwdriver: Use a screwdriver to push the latch back into the door.
- Pull the latch: Use pliers to grab the latch and pull it out of the door.
- Unscrew the latch: If the latch is screwed into the door, use a screwdriver to remove the screws and remove the latch.
4. The New Doorknob Won’t Fit
- Check the size: Make sure that the new doorknob is the correct size for the door.
- Check the orientation: Ensure that the new doorknob is facing in the correct direction.
- Adjust the latch: Adjust the latch to fit the new doorknob.
Removing Emtek door knobs may present some challenges, but with these tips and workarounds, you can overcome them and successfully remove and replace the doorknob.
Remember to take your time, be patient, and use the right tools to avoid damaging the door or the doorknob.
EMTEK Replace Cylinder Key in Knob and Key in Lever
FAQs: How To Remove Emtek Door Knob
How Do I Remove an Emtek Door Knob?
To remove an Emtek door knob, you need to locate the setscrew on the shank and loosen it with an Allen wrench. Then, pull the knob off the spindle.
What Tools Do I Need to Remove an Emtek Door Knob?
You only need an Allen wrench to remove an Emtek door knob. The setscrew on the shank can be loosened with this tool.
Can I Remove an Emtek Door Knob Without Any Tools?
Nope, sorry DIY homeowners! You’ll definitely need some tools (at least a screwdriver and an Allen wrench) to get the job done.
Can I Reinstall My Old Emtek Door Knob Once It’s Removed?
Yes, you can reinstall your old Emtek door knob once it’s removed. Simply slide the knob onto the spindle and tighten the setscrew with an Allen wrench.
What Should I Do If I Accidentally Damage the Door While Removing the Knob?
Oopsie! If you accidentally damage the door while removing the Emtek doorknob, the severity of the repair will depend on the extent of the damage. If the scratches are very minor, you can try buffing them out with a soft cloth and furniture polish.
For deeper scratches that reach the wood, you can use a wood filler to fill the scratch. It’s best to consult with a professional, as they know what to do as per the situation.
Conclusion
So there you have it, DIY enthusiast! Removing an Emtek door knob isn’t as hard as it seems. Just take your time, follow the steps, and before you know it, you’ll be a door knob removal pro!